On this day we got the cabinetry installed, bench back in place, counter tops fabricated, and shelving cut.  We also spent a couple of hours scrubbing every inch of the inside of the trailer.  We fabricated the access panel for the rear access hatch, where we will install all the bulkhead connectors, network input, cable and telephone input jacks and all the antenna coax connectors.  This will allow us to simply open the small hatch, plug in network, phones, connect cable and all of our external antenna coax cabling, without compromising the interior of the trailer.  We further made the holes for the network and telephone jacks and wall plates and got the initial cabling installed as well.

 
    View from side door - 3 operating positions.                  View from rear door.

 
        Outside access panel.                       Access panel inside trailer.

   Korene - KI4IWC working away.

BACK